Home
zte

ZTE Blade V10 Vita Stock Firmware Flash File (Hang on Logo Dead Boot Fix)

Is your ZTE Blade V10 Vita stuck on the boot logo, caught in an infinite reboot loop, or completely dead after a failed software update? Spreadtrum/Un

Is your ZTE Blade V10 Vita stuck on the boot logo, caught in an infinite reboot loop, or completely dead after a failed software update? Spreadtrum/Unisoc chipset devices frequently encounter corrupted partition tables or system crashes due to heavy app errors or interrupted flashing. Reinstalling the official stock firmware using the SPD Upgrade Tool is the ultimate and most reliable way to revive your device.

Why Flash ZTE Blade V10 Vita Official Firmware?

Flashing the factory ROM package restores your phone back to its original factory condition and fixes numerous software glitches:

  • Fixes hang on logo, freezing issues, and constant restarting loops.
  • Recovers soft-bricked or dead boot devices during flashing recovery.
  • Removes forgotten screen lock patterns, PIN codes, or password blocks.
  • Cleans out stubborn malware, adware, and forced system force-close popups.

Required Downloads & Utilities

Make sure to download all the necessary files and drivers from the direct links provided below before starting:

Step-by-Step Guide to Flash ZTE Blade V10 Vita via SPD Tool

  1. Step 1: Install Spreadtrum USB Drivers

    Download and install the SPD USB drivers package on your Windows computer. Proper driver installation is critical so your PC can detect your ZTE phone in download mode.

  2. Step 2: Extract Firmware and Flashing Tool

    Unzip the downloaded ZTE Blade V10 Vita firmware archive and the SPD Upgrade Tool on your PC desktop using WinRAR or 7-Zip. Locate the firmware file ending with the .pac extension.

  3. Step 3: Open SPD Upgrade Tool

    Navigate to the extracted SPD Upgrade Tool folder and run UpgradeDownload.exe as an administrator.

  4. Step 4: Load the PAC Firmware File

    Click on the Load Packet button (the single gear icon at the top-left corner of the program interface) and browse to select the extracted ZTE Blade V10 Vita .pac file.

  5. Step 5: Connect Phone in Download Mode

    Click on the Start Downloading button (play/triangle icon) in the tool. Power off your ZTE Blade V10 Vita completely, press and hold the Volume Down (or Volume Up) button, and connect it to the computer via a standard USB data cable.

  6. Step 6: Flashing Process

    Once the device is detected on the COM port, the progress bar will start automatically. Keep the cable steady and do not disconnect or press any keys until the flashing process finishes.

  7. Step 7: Success and Reboot

    When the flash completes successfully, a green "Passed" notification will appear on the tool interface. Disconnect your phone and power it on. The first boot after a fresh flash may take around 3 to 5 minutes.

Important Precaution: Flashing will wipe all personal data stored on internal storage. Make sure your device battery is charged above 40% before proceeding.

Conclusion

By carefully following this tutorial, you can successfully unbrick your ZTE Blade V10 Vita and fix hang-on-logo errors using the official SPD firmware. If you run into any port detection issues or flashing errors, leave a comment below for assistance!