Home
Mix Clone Firmware

How to Flash ZTE A5 2019 Pac File With SPD Upgrade Tool

If your ZTE A5 2019 smartphone is facing software issues, bootloop, lagging, or getting stuck on the logo, flashing the official stock firmware is the

If your ZTE A5 2019 smartphone is facing software issues, bootloop, lagging, or getting stuck on the logo, flashing the official stock firmware is the best solution. In this comprehensive guide, we will walk you through the step-by-step process of how to flash the ZTE A5 2019 Pac File using the SPD Upgrade Tool safely and easily.

Prerequisites Before Flashing ZTE A5 2019

  • Backup Your Data: Flashing will erase all internal phone data. Make sure to take a complete backup before starting.
  • Charge Your Phone: Ensure your phone has at least 50% battery charge to avoid unexpected shutdowns during the flashing process.
  • Windows PC/Laptop: You will need a Windows computer and a standard USB data cable.

Required Files & Downloads

Before proceeding with the tutorial, download all the necessary files given below:

Step-by-Step Guide to Flash ZTE A5 2019 Using SPD Upgrade Tool

  1. Install SPD USB Drivers

    Download and install the Spreadtrum (SPD) USB drivers on your Windows PC. If drivers are not installed correctly, your computer will not recognize your phone.

  2. Download and Extract Firmware & Tool

    Download the ZTE A5 2019 PAC firmware and the SPD Upgrade Tool ZIP file to your computer. Extract both packages using WinRAR or 7-Zip.

  3. Launch SPD Upgrade Tool

    Open the extracted SPD Upgrade Tool folder and run the application file named UpgradeDownload.exe as Administrator.

  4. Load the Firmware PAC File

    Click on the first button with the gear icon (Load Packet) in the tool and select the downloaded .pac firmware file for your ZTE A5 2019.

  5. Connect Your Phone

    Click on the Start Downloading button (Play icon) at the top of the tool. Now, switch off your ZTE A5 2019 completely. Press and hold the Volume Down or Volume Up key and connect it to the PC via USB cable.

  6. Flashing Process Begins

    Once the device is detected by the tool, the flashing process will start automatically. This process may take 5 to 10 minutes. Do not disconnect the cable or press any keys during this time.

  7. Completion and Reboot

    When the flashing is successfully completed, you will see a "Passed" message in green on the tool. Disconnect your phone from the computer and power it on. The first boot may take a few minutes.

Conclusion

By following this simple guide, you have successfully learned how to flash your ZTE A5 2019 using the SPD Upgrade Tool. If you encounter any errors or have questions during the process, feel free to drop a comment below!