Is your QMobile i8i 2019 stuck on logo, dead after flashing, or showing a software error? Don't worry — this post will help you repair the OS by flashing the official stock firmware using the free SPD Flash Tool.
This method is ideal for fixing issues such as:
- QMobile i8i 2019 stuck on startup logo
- Dead after flash issue
- QMobile i8i null IMEI / unknown baseband
- Bootloop or app crashing
- Software errors or system corruption
⚙️ How to Flash QMobile i8i 2019 Using SPD Flash Tool
- Install the SPD (Spreadtrum) USB drivers on your PC
- Download and extract the QMobile i8i 2019 firmware zip using WinRAR or 7-Zip
- Open ResearchDownload or UpgradeDownload SPD tool
- Click on the "Load Packet" icon and select the PAC file from the firmware folder
- Click the "Start" button in the tool
- Power off your phone, then connect it to the PC via USB cable
- Wait for the flashing process to complete (usually takes 5–10 minutes)
⚠️ Important:
Make sure your device has enough charge before flashing. Do not disconnect during the process. Back up important data — flashing will erase everything.
Make sure your device has enough charge before flashing. Do not disconnect during the process. Back up important data — flashing will erase everything.
📥 Download QMobile i8i 2019 Firmware + Flash Tool
QMobile i8i 2019 Full Flash
PAC File + SPD Flash Tool
🔽 Download Firmware
🔐 File Password: infinityrom.com
If you face errors like "Failed: NV data corrupted" or "Download failed," try using a different USB port, replace your cable, or re-install the drivers.
Still stuck? Feel free to ask for help in the comments or check other repair guides on our website for similar SPD-based models.