If your Moto G24 Power XT2421-3 is stuck on the logo screen, facing boot issues, or just running slow, you're in the right place. This guide will help you restore your phone to working condition using the official Moto G24 Power XT2421-3 flash file and reliable flashing tools.
⚠️ Important Warning Before Proceeding
Installing stock ROM will wipe all user data and may void the warranty of your Moto G24 Power XT2421-3. Make sure you understand the risks involved before proceeding.
š ️ Problems Fixed by Flashing Moto G24 Power XT2421-3
- š Bootloop or stuck on Motorola logo
- šµ Dead phone (no power after wrong flash)
- ⚫ Black screen or no display post flash
- š️ Touchscreen not working after update
- š dm verity verification failed
- š Red/Orange State errors
- ⚙️ System or OS mounting problems
- š Fastboot mode stuck or software crash
š§° Required Tools & Resources
- ✔️ Moto G24 Power XT2421-3 Stock ROM (Official)
- ✔️ RSD Lite Flashing Tool or Rescue and Smart Assistant
- ✔️ Latest Motorola USB Drivers
š¦ Firmware & Tools Download Links
| File | Download |
|---|---|
| G24 Power XT2421-3 OS14 Firmware (LION) | Download |
| Motorola Rescue and Smart Assistant (RSA) | Download |
| RSD Lite Tool v6.2.4 | Download |
š Step-by-Step Flashing Instructions
- Charge your Moto G24 Power XT2421-3 above 50% to avoid shutdown during flashing.
- Install Motorola USB drivers on your PC.
- Extract the firmware and open RSD Lite or RSA tool.
- Boot your phone into fastboot mode and connect it via USB.
- Load the correct XML or scatter file and begin flashing.
- Wait until the process is complete. Do not disconnect until success message appears.
š After Flash Tips
- ⚙️ First boot may take 5–10 minutes, do not panic.
- š If touchscreen fails, try flashing with a different build or reflash again.
- š Always use an original data cable for best stability.
Need help during flashing? Drop your questions in the comment section of our videos or search this site for other related models and fixes.