If your Moto G Power XT2117-4 has become unresponsive, keeps restarting, or is stuck on the boot logo, then flashing the official stock firmware might be the perfect solution. This article provides a step-by-step method along with the necessary tools and drivers to restore your Moto G Power XT2117-4 back to working condition.
⚠️ Flashing Warning
Installing stock firmware may erase your personal data and also cancel your phone's warranty. Perform this process only if you are confident and understand the risks.
š Symptoms That Need Flashing
- š Bootloop or stuck at Moto logo
- š§± Dead boot or fastboot only mode
- š“ Black screen after flashing
- š” Network or IMEI issues post software update
- š² Touch not working properly after ROM install
- š dm-verity or red state error warning
š Required Files and Flashing Tools
Here are the official tools and files needed to successfully flash your Moto G Power XT2117-4 device:
| File/Tool | Download |
|---|---|
| Stock ROM: Moto G Power XT2117-4 (RETUS Android 10) | Download |
| Motorola Rescue and Smart Assistant (RSA) | Download |
| RSD Lite v6.2.4 Flash Tool | Download |
š§ Flashing Instructions
- Charge your device to at least 50% battery level.
- Download and install Motorola USB drivers on your PC.
- Extract the firmware ZIP file and launch the RSD Lite or RSA tool.
- Power off your phone and boot into fastboot mode (Press Volume Down + Power).
- Select the flash file inside the tool and begin flashing.
- Do not disconnect your phone during the process; wait for the success message.
š” Common Issues After Flashing & Fixes
- Touch not responding: Use region-specific firmware only.
- Black screen after flash: Reboot to recovery and wipe data/cache.
- Red state/dm-verity fail: Format data or reflash with secure firmware.
Still facing problems? Ask your questions in the comment section under our videos or search your exact Moto model here on our website to get the full solution method.