If your Samsung S8+ G955F is lagging, stuck on boot logo, or facing software bugs, it's time to upgrade or reinstall its firmware. On this page, you’ll find a secure way to download the original stock ROM for the Galaxy S8+ G955F. Whether you're dealing with performance degradation, update issues, or a software crash, flashing the official firmware can fix most problems quickly and safely.
📲 Why You Should Flash the Stock Firmware?
- Restore Performance: Over time, your phone may slow down due to cluttered apps or corrupted data. Installing the original firmware gives you a clean and fresh system.
- Fix Boot Issues: If your S8+ is stuck at boot, showing the Samsung logo, or restarting randomly, flashing can resolve these errors.
- Remove Viruses or Malware: Reinstalling the ROM ensures harmful third-party apps or hidden viruses are removed permanently.
- Latest Features & Security: Official firmware brings the newest features, improved battery optimization, and updated Android security patches.
🔐 Important Warning:
Ensure you download the correct firmware version based on your device’s model number (G955F). Flashing the wrong firmware may damage your device. Backup your data before proceeding.
✅ Samsung S8+ G955F Firmware Download
| File Name |
|---|
| Download Samsung S8+ G955F Stock Firmware (ZIP) |
⚙️ How to Flash Samsung S8+ G955F via Odin
- Step 1 – Prepare Your Phone: Charge the battery above 50% and back up your data. Enable USB debugging in Developer Options.
- Step 2 – Enter Download Mode: Power off the phone. Hold Volume Down + Bixby + Power until you see the warning screen. Then press Volume Up to enter Download Mode.
- Step 3 – Connect to PC: Use a USB data cable to connect your device to your computer. Make sure Samsung USB drivers are installed.
- Step 4 – Use Odin Tool: Open the Odin Flash Tool. Load the firmware files into respective slots (AP, BL, CP, CSC).
- Step 5 – Start Flashing: Click the "Start" button. Wait for the green PASS message, and your device will reboot automatically.
📌 Note:
If your device gets stuck in a boot loop after flashing, enter recovery mode and perform a factory reset to fix it.