If you're facing software glitches, slow performance, or boot issues with your Galaxy S10 G973F, then flashing the official stock ROM can solve your problems. Here on this page, you'll get the official firmware for Galaxy S10 G973F and step-by-step instructions to flash it correctly using the Odin flash tool. This guide is especially useful if your Galaxy S10 is stuck on the Samsung logo, facing dead boot, or showing errors like "dm-verity corruption" or "frp lock" after flashing.
Why Install Galaxy S10 G973F Firmware?
Official firmware or stock ROM acts as the backbone of your Galaxy S10 system. Whether your phone is lagging, stuck in a boot loop, or showing unusual errors, installing a fresh firmware can restore it to factory condition. This method is 100% safe and can fix issues such as:
- Dead boot or no power after update
- Boot stuck on logo or Samsung screen
- IMEI null, baseband unknown, or no service problems
- Red/Orange State warnings after custom mods
- Touch not working after flashing wrong firmware
- Slow speed, freezing, and hanging issues
Benefits of Flashing Latest Firmware
Updating your Galaxy S10 G973F with the latest firmware improves system performance, security, and features. It also installs the latest security patches and resolves software bugs from previous versions. Most importantly, it helps remove bloatware and restores your phone's original smoothness.
Download Galaxy S10 G973F Stock Firmware
| Firmware & ROM Download Link |
|---|
| Download Galaxy S10 G973F Stock ROM |
Firmware Flashing Preparation
Before flashing, follow these important steps:
- Charge the phone battery to at least 50%
- Enable USB Debugging from Developer Options
- Install Samsung USB drivers on your PC
- Use a high-quality original USB cable
- Take backup of important files – flashing will wipe data
How to Flash Galaxy S10 G973F Using Odin Tool
- Power off the phone completely
- Press and hold Volume Down + Bixby + Power button to enter Download Mode
- Press Volume Up to continue to Download Mode
- Open Odin on your PC and connect your phone via USB
- In Odin, click on “AP” and select the .tar.md5 firmware file
- Optional: If available, load BL, CP, and CSC files as well
- Click on “Start” to begin the flashing process
- Wait until Odin shows “PASS” and the phone reboots automatically
Troubleshooting Tips After Flash
- If phone is stuck on boot, enter Recovery Mode and wipe data/factory reset
- If Wi-Fi, camera, or touch isn’t working – reflash using correct regional firmware
- If IMEI or network is lost, restore it using a professional tool or backup
This method is perfect for repairing software-damaged phones, including no service problems, pattern lock stuck, cache mount failed, or system verification issues. Keep your Galaxy S10 healthy by installing firmware regularly.