If your Galaxy J2 J260F is stuck on logo, experiencing boot loops, or showing errors like "DM-Verity Verification Failed", it's time to refresh the software with the official stock firmware. This page provides you with the tested Galaxy J2 J260F flash file along with a complete flashing method using Samsung's Odin tool.
š§ Common Software Issues Fixed by Flashing
- Device stuck on Samsung logo or bootloop
- After flash touch not working
- Dead after flashing with wrong file
- Slow performance and freezing
- IMEI null, no service, baseband unknown
- Pattern lock, pin code, or FRP locked (legal use only)
š„ Download Galaxy J2 J260F Firmware
| File Name | Download Link |
|---|---|
| Galaxy J2 J260F Official Firmware | Click Here to Download |
⚙️ How to Flash Galaxy J2 J260F Using Odin Tool
- Charge your phone to at least 50% and backup important data.
- Download and install Samsung USB Drivers on your PC.
- Put your phone into Download Mode: Press Volume Down + Home + Power buttons together, then press Volume Up.
- Open Odin tool on PC and connect the device via USB cable.
- Odin will detect your phone (blue box will appear).
- Click AP and select the firmware file (.tar.md5).
- (Optional) Add BL, CP, CSC if the package contains these files.
- Click on Start to begin flashing. Wait until you see “PASS!”
- Your phone will reboot with fresh firmware installed.
š Important Notes:
- Always use correct firmware according to model & region.
- Do not disconnect cable during flashing.
- This process may erase your data – ensure backup is done.
š¢ Disclaimer:
This guide is meant for educational purposes. Flashing firmware should only be done if you understand the risks involved. We are not responsible for any damage caused during the flashing process. All files are free and officially released.