If your Vivo Y30 (Model PD1987F) is not performing as it used to — stuck on logo, running slow, or showing errors — flashing the stock ROM can bring it back to life. This post will help you safely download and install the official firmware to fix software issues.
📱 Model Details
- Phone Name: Vivo Y30
- Model Number: PD1987F
- Chipset: MediaTek (MTK)
- Firmware Type: Scatter-based Flash File
🔧 When to Flash Your VIVO Y30
- Phone stuck on Vivo logo (bootloop issue)
- After flashing, the touch or camera not working
- Dead boot or device not turning on
- System errors like dm verity failed or orange/red state
- Performance issues, lag, or virus-infected firmware
Flashing restores your device to its original factory state and eliminates most software problems.
📥 Download VIVO Y30 Firmware
Firmware Version: VIVO_Y30_PD1987F_EX_A_1.70.21
File Format: .rar
⚙️ How to Flash VIVO Y30 PD1987F (Step-by-Step)
You will use the SP Flash Tool (Smart Phone Flash Tool), not Odin.
- Extract the downloaded firmware on your PC
- Download and install MTK USB drivers (if not already installed)
- Open the SP Flash Tool and click “Scatter-loading”
- Select the scatter file from the extracted firmware folder
- Click on the “Download” button in SP Flash Tool
- Turn off the phone completely
- Hold both Volume Up + Down keys and connect the phone to your PC via USB
- Wait for the flashing to complete (you’ll see a green check mark)
🔒 Important Tips
- Ensure you use the correct firmware for model PD1987F only
- Back up all your important data before flashing
- Use a good quality USB cable and avoid interruptions during the flash
- Don’t use Samsung tools like Odin — use only MTK SP Flash Tool