Huawei Y5P DRA-LX9 Stock ROM Firmware | Dead Boot | IMEI Fix | Hang Logo Solution
If you're facing issues like Huawei Y5P DRA-LX9 hang on logo, bootloop, or the device is completely dead after flashing, this guide is the ultimate solution. With our tested files and tools, you can flash the firmware, repair dead boot, and even fix null IMEI problems easily—all free of cost.
In this article, we’re providing all essential flash tools, DA files, drivers, and a detailed step-by-step flashing method to restore your Huawei Y5P DRA-LX9.
| ⚠️ Important: Flashing stock ROM will erase all data. Make sure to back up before proceeding. Always match the firmware version with your device model (DRA-LX9). |
⬇️ Huawei Y5P DRA-LX9 Flash File & Tool Download Links
100% Free & Password-Free Firmware
š² How to Flash Huawei Y5P DRA-LX9 Using SP Flash Tool
- First, extract all downloaded ZIP files using WinRAR or 7Zip.
- Install all required USB drivers on your PC.
- Run the MCT Auth Bypass Tool and click the “Bypass” button.
- Power off the phone and press both Volume Up + Down keys together.
- Connect the phone to the PC via USB. It will show the MTK port in Device Manager.
- Open SP Flash Tool. Load the scatter file from the extracted firmware folder.
- Go to the Connection tab in SP Flash Tool. Select "UART", set Baud Rate to 921600, and choose the correct COM port.
- Click "Download" and wait for the flashing process to complete.
- Once done, your Huawei Y5P will reboot automatically with a fresh system.
Common Problems You Can Fix With This Firmware:
- Dead after flash
- Huawei Y5P not turning on
- Null or Invalid IMEI
- Unknown baseband
- Stuck on logo / bootloop
- FRP lock / Google account lock